The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
NET BATSubject:
~Re: NOD32 AND WE6 AGAINDate:
Thu, Jan 25, 2007 12:28:30 pmContent-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
slite correction. pressing space bar will not turn off the use of graphics. you have to press alt s to open the setup screen and uncheck the use of graphics in there.
----- Original Message -----
From: Richard Turner
To: Window-eyes List
Sent: Thursday, January 25, 2007 5:32 AM
Subject: RE: NOD32 AND WE6 AGAIN
Hi,
When you get into the Nod32 panel, go to the bottom where it says Systemtools.
Hit the right arrow to open that section and down arrow to system set up. Then, hit control+tab once.
Arrow down and the first item should be use of graphics. Hit the space bar to turn it off.
Then, you should be up and running.
Richard
------------------------------------------------------------------------------
From: Richard Bartholomew [mailto:richard_bartholomew@blueyonder.co.uk]
Sent: Thursday, January 25, 2007 1:01 AM
To: gw-info@gwmicro.com
Subject: NOD32 AND WE6 AGAIN
Hi,
Okay, after doing a bit more looking, I've found the areas where I can configure the program now but still can't see how to add a new scheduled task - I can see those already available but can't get to the appropriate button/graphic to be able to add one.
Again, thanks in advance for any assistance.
Regards
Richard Bartholomew
E-Mail: richard_bartholomew@blueyonder.co.uk
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
__________ NOD32 2006 (20070125) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
--
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
slite correction. pressing space bar will not turn off the use of graphics. you have to press alt s to open the setup screen and uncheck the use of graphics in there.
----- Original Message -----
From: Richard Turner
To: Window-eyes List
Sent: Thursday, January 25, 2007 5:32 AM
Subject: RE: NOD32 AND WE6 AGAIN
Hi,
When you get into the Nod32 panel, go to the bottom where it says Systemtools.
Hit the right arrow to open that section and down arrow to system set up. Then, hit control+tab once.
Arrow down and the first item should be use of graphics. Hit the space bar to turn it off.
Then, you should be up and running.
Richard
------------------------------------------------------------------------------
From: Richard Bartholomew [mailto:richard_bartholomew@blueyonder.co.uk]
Sent: Thursday, January 25, 2007 1:01 AM
To: gw-info@gwmicro.com
Subject: NOD32 AND WE6 AGAIN
Hi,
Okay, after doing a bit more looking, I've found the areas where I can configure the program now but still can't see how to add a new scheduled task - I can see those already available but can't get to the appropriate button/graphic to be able to add one.
Again, thanks in advance for any assistance.
Regards
Richard Bartholomew
E-Mail: richard_bartholomew@blueyonder.co.uk
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
__________ NOD32 2006 (20070125) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
--
