The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
Tom LorimerSubject:
Ad-Aware HelpDate:
Sun, Oct 1, 2006 12:04:46 pmContent-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Ad-Aware works fine with Window Eyes, providing you know how to use the mouse keys, and you don't have to label anything.
The instructions below are all done on the numeric keypad.
1. Load Ad-Aware.
2. Press 1 then arrow up till you land on the Start option and press the left mouse key.
3. Press 5 and it should say Next, so press the left mouse key.
4. Press 5 again and it should say Cancel so if you arrow up once you can now read what is being found by Ad-Aware.
5. The scan make take from 1 minute to 10 depending on the size of your hard disk so just let it do its thing.
6. You'll know when it's finished when you hear that loud noise which frightens the living daylight out of you.
7. Pressing 5 will tell you how many items it has found.
8. Arrow down once to the Next button and press the left mouse key.
9. Press 7 to go to the top left of the screen.
10. Arrow down till you hear, Tracking cookies then press the right mouse key.
11. This brings up the Context Menu.
12. On the small arrow keys arrow down and select, Select all objects, and press the Enter key.
13. Press1 then arrow up to the Next button and press the left mouse key.
14. Press 1 and arrow up to the OK button and press the left mouse key.
15. Ad-Aware will now remove all the nasties and return you to the main screen again.
16. Press Alt F4 to exit the program.
Cheers Tom.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
--
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Ad-Aware works fine with Window Eyes, providing you know how to use the mouse keys, and you don't have to label anything.
The instructions below are all done on the numeric keypad.
1. Load Ad-Aware.
2. Press 1 then arrow up till you land on the Start option and press the left mouse key.
3. Press 5 and it should say Next, so press the left mouse key.
4. Press 5 again and it should say Cancel so if you arrow up once you can now read what is being found by Ad-Aware.
5. The scan make take from 1 minute to 10 depending on the size of your hard disk so just let it do its thing.
6. You'll know when it's finished when you hear that loud noise which frightens the living daylight out of you.
7. Pressing 5 will tell you how many items it has found.
8. Arrow down once to the Next button and press the left mouse key.
9. Press 7 to go to the top left of the screen.
10. Arrow down till you hear, Tracking cookies then press the right mouse key.
11. This brings up the Context Menu.
12. On the small arrow keys arrow down and select, Select all objects, and press the Enter key.
13. Press1 then arrow up to the Next button and press the left mouse key.
14. Press 1 and arrow up to the OK button and press the left mouse key.
15. Ad-Aware will now remove all the nasties and return you to the main screen again.
16. Press Alt F4 to exit the program.
Cheers Tom.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
--
