The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
Andre.Vosloo@sita.co.zaSubject:
RE: Voice parameter hotkeys not workingDate:
Fri, Jul 28, 2006 1:21:36 amThis feature has to be disabled in your display card properties. Most cards
have a setting called hot keys which can be enabled or disabled. Disabling
it gives the hot key back to WE and disable screen rotations. If you are on
the desktop, make sure nothing is selected then hit the aplications key and
go to graphics properties. The setting should be there. Hope this helps.
-----Original Message-----
From: Kevin Huber [mailto:khuber@sympatico.ca]
Sent: 27 July 2006 04:08 PM
To: jamiepauls@sbcglobal.net; gw-info@gwmicro.com
Subject: Re: Voice parameter hotkeys not working
Hi:
Some systems have the ability to rotate the screen and they use the control
alt arrow keys to do it. If this is the case, you need to disable this
feature. I am not sure how you do that, but I think there are other people
on this list who can help you there.
Kevin Huber
----- Original Message -----
From: "Jamie Pauls"
To:
Sent: Wednesday, July 26, 2006 8:33 PM
Subject: Voice parameter hotkeys not working
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
This email and any accompanying attachments may contain confidential and
proprietary information. This information is private and protected by law
and, accordingly, if you are not the intended recipient, you are requested
to delete this entire communication immediately and are notified that any
disclosure, copying or distribution of or taking any action based on this
information is prohibited. Emails cannot be guaranteed to be secure or free
of errors or viruses. The sender does not accept any liability or
responsibility for any interception, corruption, destruction, loss, late
arrival or incompleteness of or tampering or interference with any of the
information contained in this email or for its incorrect delivery or
non-delivery for whatsoever reason or for its effect on any electronic
device of the recipient.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
.
have a setting called hot keys which can be enabled or disabled. Disabling
it gives the hot key back to WE and disable screen rotations. If you are on
the desktop, make sure nothing is selected then hit the aplications key and
go to graphics properties. The setting should be there. Hope this helps.
-----Original Message-----
From: Kevin Huber [mailto:khuber@sympatico.ca]
Sent: 27 July 2006 04:08 PM
To: jamiepauls@sbcglobal.net; gw-info@gwmicro.com
Subject: Re: Voice parameter hotkeys not working
Hi:
Some systems have the ability to rotate the screen and they use the control
alt arrow keys to do it. If this is the case, you need to disable this
feature. I am not sure how you do that, but I think there are other people
on this list who can help you there.
Kevin Huber
----- Original Message -----
From: "Jamie Pauls"
To:
Sent: Wednesday, July 26, 2006 8:33 PM
Subject: Voice parameter hotkeys not working
I am still using the demo of Window-Eyes. After listening through the MP3
tutorial, I decided to try CTRL-Alt plus the arrow keys to adjust voice
parameters. These commands do not seem to do anything on my system. They
seem to be defined in the list of hotkeys. Am I doing something wrong?
Jamie Pauls, MT-BC
E-mail and MSN: jamiepauls@gmail.com
Skype: jamie.pauls
Web site: www.accesswatch.info
Blog: http://accesswatch.livejournal.com
Podcast: http://feeds.feedburner.com/accesswatch
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
This email and any accompanying attachments may contain confidential and
proprietary information. This information is private and protected by law
and, accordingly, if you are not the intended recipient, you are requested
to delete this entire communication immediately and are notified that any
disclosure, copying or distribution of or taking any action based on this
information is prohibited. Emails cannot be guaranteed to be secure or free
of errors or viruses. The sender does not accept any liability or
responsibility for any interception, corruption, destruction, loss, late
arrival or incompleteness of or tampering or interference with any of the
information contained in this email or for its incorrect delivery or
non-delivery for whatsoever reason or for its effect on any electronic
device of the recipient.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
.
