The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
Chris Hill <hillco@earthlink.net>Subject:
Re: WE beta and event viewerDate:
Sat, Nov 3, 2012 11:32:16 amI just tried this from a fresh boot under windows 7 64, window-eyes with
dec access 32 as my speech. I went into event viewer, picked the system
log and tabbed into it. I got message that there were some 46,000
events and the first event spoke almost immediately, then i hit down
arrow. Window-eyes hung and never said another word until I fired up
jaws, at which point it commenced to speak again.
On 11/2/2012 11:54, Tom Kingston wrote:
> What can I say? After hitting enter on the list I want to view I wait
> until I hear the name followed by the amount of events in the list. Then
> it works fine and is very responsive.
>
> So all I can suggest is, again, trying turning apps off just in case.
> And I'd probably try using a different synth as well; especially if
> you're using eloquence.
>
> Hth,
> Tom
>
>
> On 11/2/2012 10:38 AM, Chris Hill wrote:
>> If that was the problem, it would get better over time. Mine gets worse.
>>
>>
>>
>> On 11/1/2012 23:01, Tom Kingston wrote:
>>> I've never had any problem with it and just tried it again. I do wait
>>> probably about 10 seconds after opening it as it seems to compile the
>>> list on the fly. But then it's very responsive and I have no problems
>>> with it.
>>> Try turning apps off to see if that solves the problem.
>>>
>>> Regards,
>>> Tom
>>>
>>>
>>> On 11/1/2012 11:29 PM, Chris Hill wrote:
>>>> It didn't lock on me, but it did get very sluggish once I'd tabbed into
>>>> the system log. It has always been ugly in event viewer, but I
>>>> think it
>>>> may be worse.
>>>>
>>>>
>>>>
>>>>
>>>> On 11/1/2012 21:18, Don H wrote:
>>>>> Running the WE beta on a win 7 64 bit machine. If I try to go to the
>>>>> event viewer to review system errors I lose speech. Requires a reboot
>>>>> to get speech back.
>>>>> If you reply to this message it will be delivered to the original
>>>>> sender
>>>>> only. If your reply would benefit others on the list and your
>>>>> message is
>>>>> related to GW Micro, then please consider sending your message to
>>>>> gw-info@gwmicro.com so the entire list will receive it.
>>>>>
>>>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
>>>>> can
>>>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>>>
>>>>>
>>>> If you reply to this message it will be delivered to the original
>>>> sender
>>>> only. If your reply would benefit others on the list and your
>>>> message is
>>>> related to GW Micro, then please consider sending your message to
>>>> gw-info@gwmicro.com so the entire list will receive it.
>>>>
>>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>>
>>>>
>>> If you reply to this message it will be delivered to the original sender
>>> only. If your reply would benefit others on the list and your message is
>>> related to GW Micro, then please consider sending your message to
>>> gw-info@gwmicro.com so the entire list will receive it.
>>>
>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>
>>>
>> If you reply to this message it will be delivered to the original sender
>> only. If your reply would benefit others on the list and your message is
>> related to GW Micro, then please consider sending your message to
>> gw-info@gwmicro.com so the entire list will receive it.
>>
>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>> manage your list subscription at http://www.gwmicro.com/listserv.
>>
>>
> If you reply to this message it will be delivered to the original sender
> only. If your reply would benefit others on the list and your message is
> related to GW Micro, then please consider sending your message to
> gw-info@gwmicro.com so the entire list will receive it.
>
> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
> manage your list subscription at http://www.gwmicro.com/listserv.
>
>
If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to gw-info@gwmicro.com so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
dec access 32 as my speech. I went into event viewer, picked the system
log and tabbed into it. I got message that there were some 46,000
events and the first event spoke almost immediately, then i hit down
arrow. Window-eyes hung and never said another word until I fired up
jaws, at which point it commenced to speak again.
On 11/2/2012 11:54, Tom Kingston wrote:
> What can I say? After hitting enter on the list I want to view I wait
> until I hear the name followed by the amount of events in the list. Then
> it works fine and is very responsive.
>
> So all I can suggest is, again, trying turning apps off just in case.
> And I'd probably try using a different synth as well; especially if
> you're using eloquence.
>
> Hth,
> Tom
>
>
> On 11/2/2012 10:38 AM, Chris Hill wrote:
>> If that was the problem, it would get better over time. Mine gets worse.
>>
>>
>>
>> On 11/1/2012 23:01, Tom Kingston wrote:
>>> I've never had any problem with it and just tried it again. I do wait
>>> probably about 10 seconds after opening it as it seems to compile the
>>> list on the fly. But then it's very responsive and I have no problems
>>> with it.
>>> Try turning apps off to see if that solves the problem.
>>>
>>> Regards,
>>> Tom
>>>
>>>
>>> On 11/1/2012 11:29 PM, Chris Hill wrote:
>>>> It didn't lock on me, but it did get very sluggish once I'd tabbed into
>>>> the system log. It has always been ugly in event viewer, but I
>>>> think it
>>>> may be worse.
>>>>
>>>>
>>>>
>>>>
>>>> On 11/1/2012 21:18, Don H wrote:
>>>>> Running the WE beta on a win 7 64 bit machine. If I try to go to the
>>>>> event viewer to review system errors I lose speech. Requires a reboot
>>>>> to get speech back.
>>>>> If you reply to this message it will be delivered to the original
>>>>> sender
>>>>> only. If your reply would benefit others on the list and your
>>>>> message is
>>>>> related to GW Micro, then please consider sending your message to
>>>>> gw-info@gwmicro.com so the entire list will receive it.
>>>>>
>>>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
>>>>> can
>>>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>>>
>>>>>
>>>> If you reply to this message it will be delivered to the original
>>>> sender
>>>> only. If your reply would benefit others on the list and your
>>>> message is
>>>> related to GW Micro, then please consider sending your message to
>>>> gw-info@gwmicro.com so the entire list will receive it.
>>>>
>>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>>
>>>>
>>> If you reply to this message it will be delivered to the original sender
>>> only. If your reply would benefit others on the list and your message is
>>> related to GW Micro, then please consider sending your message to
>>> gw-info@gwmicro.com so the entire list will receive it.
>>>
>>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>>> manage your list subscription at http://www.gwmicro.com/listserv.
>>>
>>>
>> If you reply to this message it will be delivered to the original sender
>> only. If your reply would benefit others on the list and your message is
>> related to GW Micro, then please consider sending your message to
>> gw-info@gwmicro.com so the entire list will receive it.
>>
>> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
>> manage your list subscription at http://www.gwmicro.com/listserv.
>>
>>
> If you reply to this message it will be delivered to the original sender
> only. If your reply would benefit others on the list and your message is
> related to GW Micro, then please consider sending your message to
> gw-info@gwmicro.com so the entire list will receive it.
>
> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
> manage your list subscription at http://www.gwmicro.com/listserv.
>
>
If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to gw-info@gwmicro.com so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
