The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
pasquale acquavivaSubject:
Re: Window-Eyes Error ReportingDate:
Fri, May 6, 2011 11:59:55 amHello to Peggy, David, and the rest of the list,
This happens to me with a surprisingly high frequency and in the same manner as described by both David and Peggy. I thought this phenomenon would vanish with the installation of window-eyes 7.5 from my previously installed Window-eyes 7.2, but that appears to have been wishful thinking.
I might also note this installation of 7.5 was a clean install.
Since the errors invariably occur only when window_eyes Is first started amd I am most often not given the response that GwMicro has received the error report, what good is sending the error report?
--- On Fri, 5/6/11, David wrote:
From: David
Subject: Re: Window-Eyes Error Reporting
To: "Peggy Kern" , "GW"
Date: Friday, May 6, 2011, 2:58 AM
This happens all the time here, and that is even under 7.2. Lets say, once out of every 20 times, you get the confirmation the report has gone through.. Not sure why. Yet, if it more or less never shows up, why ever bother making a confirmation screen. :)
----- Original Message -----
From: Peggy Kern
To: GW
Sent: Friday, May 06, 2011 6:47 AM
Subject: Window-Eyes Error Reporting
Hi, guys. I’ve noticed that since version 7.5, sometimes WE will come up and want to report an error, even though, as far as I could tell, everything worked fine and there were no problems. And then when I send the error report, I can’t tell when it has actually been sent, because it never says “thank you for sending”, etc., and I get no results when I move around with the mouse keys to try to find the status. Has anyone else experienced these things with the error reporting? I like to report errors, but I like to know when they’ve been reported so I know that I can close the window. As it is, I give it a few minutes then close the window, but maybe none of my supposed errors have been reported. Thoughts?
Peggy
If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to gw-info@gwmicro.com so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
This happens to me with a surprisingly high frequency and in the same manner as described by both David and Peggy. I thought this phenomenon would vanish with the installation of window-eyes 7.5 from my previously installed Window-eyes 7.2, but that appears to have been wishful thinking.
I might also note this installation of 7.5 was a clean install.
Since the errors invariably occur only when window_eyes Is first started amd I am most often not given the response that GwMicro has received the error report, what good is sending the error report?
--- On Fri, 5/6/11, David wrote:
From: David
Subject: Re: Window-Eyes Error Reporting
To: "Peggy Kern" , "GW"
Date: Friday, May 6, 2011, 2:58 AM
This happens all the time here, and that is even under 7.2. Lets say, once out of every 20 times, you get the confirmation the report has gone through.. Not sure why. Yet, if it more or less never shows up, why ever bother making a confirmation screen. :)
----- Original Message -----
From: Peggy Kern
To: GW
Sent: Friday, May 06, 2011 6:47 AM
Subject: Window-Eyes Error Reporting
Hi, guys. I’ve noticed that since version 7.5, sometimes WE will come up and want to report an error, even though, as far as I could tell, everything worked fine and there were no problems. And then when I send the error report, I can’t tell when it has actually been sent, because it never says “thank you for sending”, etc., and I get no results when I move around with the mouse keys to try to find the status. Has anyone else experienced these things with the error reporting? I like to report errors, but I like to know when they’ve been reported so I know that I can close the window. As it is, I give it a few minutes then close the window, but maybe none of my supposed errors have been reported. Thoughts?
Peggy
If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to gw-info@gwmicro.com so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
