The GW-Info list is a discussion list, which can be very active with many messages per day. Any subscriber of the GW-Info list has the ability to post on-topic messages.
From:
Dan GistensonSubject:
Re: Performance when using software synthesisDate:
Tue, Jul 17, 2007 4:08:22 pmSounds like the drivers included with WIndows may be outdated, too.
Dan
----- Original Message -----
From: "Baracco, Andrew W"
To:
Sent: Tuesday, July 17, 2007 2:31 PM
Subject: RE: Performance when using software synthesis
I would think that they would have to install the device drivers that
support the included hardware. Actually, Windows includes drivers for
many types of devices, including scanners, cameras, printers, etc.
Andy
-----Original Message-----
From: Dan Gistenson [mailto:d.gistenson@sbcglobal.net]
Sent: Tuesday, July 17, 2007 12:17 PM
To: gw-info@gwmicro.com
Subject: Re: Performance when using software synthesis
Does this mean they don't install device drivers and other system
software? I'll have to ask Dell about this choice.
Dan
----- Original Message -----
From: "Michael D. Lawler"
To:
Sent: Tuesday, July 17, 2007 1:52 PM
Subject: Re: Performance when using software synthesis
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
Dan
----- Original Message -----
From: "Baracco, Andrew W"
To:
Sent: Tuesday, July 17, 2007 2:31 PM
Subject: RE: Performance when using software synthesis
I would think that they would have to install the device drivers that
support the included hardware. Actually, Windows includes drivers for
many types of devices, including scanners, cameras, printers, etc.
Andy
-----Original Message-----
From: Dan Gistenson [mailto:d.gistenson@sbcglobal.net]
Sent: Tuesday, July 17, 2007 12:17 PM
To: gw-info@gwmicro.com
Subject: Re: Performance when using software synthesis
Does this mean they don't install device drivers and other system
software? I'll have to ask Dell about this choice.
Dan
----- Original Message -----
From: "Michael D. Lawler"
To:
Sent: Tuesday, July 17, 2007 1:52 PM
Subject: Re: Performance when using software synthesis
I've read that Dell just started offering a line of computers withthis.
nothing on them but Windows. I don't remember more details about
At 02:34 PM 7/17/2007, you wrote:
>Hi, David.
>
>Negotiating which software is preinstalled sounds like a good idea,
but
>is this usually possible? Many posts to this list suggest that
computers
>from Dell and other companies are preinstalled and sitting on a shelf
>awaiting purchase.
>
>Dan
>
>----- Original Message -----
>From: "David R. Stayer"
>To: "Dan Gistenson"
>Cc: "GW Info Discussion List"
>Sent: Tuesday, July 17, 2007 12:54 PM
>Subject: Re: Performance when using software synthesis
>
>When
> > I had trouble with my first Vista Dell purchased this February.
> > they finally agreed to do an exchange, I convinced to install no
extra
> > software. Now it works fine and I believe purchasers of Dell
>computers
> > can negotiate want preinstalled software they want.
> >
> > Each day is a precious gift.
> > David R. Stayer, LCSW
> >
> >
> >
> > Dan Gistenson wrote:
> > > Hello, Mike and Raoul.
> > >
> > > Where should I go for the latest drivers? To the video card
>manufacturer
> > > or Dell?
> > >
> > > I understand that you suggest getting the latest drivers, but of
>course,
> > > this doesn't mean that all the kinks will have been worked out
of
>the
> > > driver, and this suggests that I should, periodically, look for
>newerstep
> > > versions of the driver. In this case, do drivers ever take a
> > > backward and unintentionally introduce new problems?
> > >
> > > Thanks for the help,
> > > Dan
> > >
> > > ----- Original Message -----
> > > From: "Raul A. Gallegos"
> > > To: "GW Info Discussion List"
> > > Sent: Tuesday, July 17, 2007 11:47 AM
> > > Subject: Re: Performance when using software synthesis
> > >
> > >
> > >got
> > >> I have a Dell and have no issues. The first thing I did when I
>thethat
> > >> Dell was reformatted it and installed Windows Vista fresh, but
>is
> > >> because I don't want any random software and any wired things
> > >>
> > > happening
> > >pre-installed.
> > >> with my computer due to all the software which is
>Theyour
> > >> only concern is to make sure you have the latest drivers for
> > >>
> > > video.
> > >June
> > >> For example. Nvidia is using April drivers and ATI is using
> > >> drivers. Your Dell machine if you get one may come with much
older
> > >> drivers. Same goes with HP although I have never used HP
computers.
> > >>
> > >> Hope this helps.
> > >>
> > >> --
> > >>
> > >> Raul A. Gallegos .. GW Micro Technical Support
> > >> Voice: 260-489-3671 .. Fax: 260-489-2608
> > >> WEB: http://www.gwmicro.com
> > >> FTP: ftp.gwmicro.com
> > >>
> > >>
> > >>
> > >> Dan Gistenson said the following on 7/16/2007 5:22 PM:
> > >>
> > >>> Hello.
> > >>>
> > >>> I'm about to buy a laptop with an AMD Turion 1.8 GHz Dual Coredecided
> > >>> processor, two GB of RAM and Vista Home Premium. I haven't
> > >>> whether to get a Dell or HP and don't know if the choice
between
>the
> > >>>
> > > two
> > >
> > >>> is an issue from the Window Eyes 6.1 perspective. I've read
some
> > >>> messages on the list about concerns with WE 6.1 performance
delays
> > >>>
> > > under
> > >Some
> > >>> Vista when using software synthesis, such as when typing,.
>havethis, so
> > >>> suggested that software synthesizers will see delays like
>aI
> > >>> hardware synthesizer should be used when running Vista. Should
> > >>>
> > > expect
> > >
> > >>> delays in Window Eyes speech if I use software synthesis?
> > >>>
> > >>> Thanks,
> > >>> Dan
> > >>>
> > >>>original
> > >>> If you reply to this message it will be delivered to the
> > >>> sender only. If your reply would benefit others on the list
and
> > >>> your message is related to GW Micro, then please consider
sending
> > >>> your message to gw-info@gwmicro.com so the entire list will
>receive
> > >>>
> > > it.
> > >
> > >>> All GW-Info messages are archived at
>http://www.gwmicro.com/gwinfo,
> > >>>
> > > and can be searched through and sorted using the search
> > >
> > >>> form at the bottom of the page.
> > >>>
> > >>> If you wish to unsubscribe from this list, send a message to
> > >>> listserv@gwmicro.com and include leave gw-info in the body
> > >>> of the message.
> > >>>
> > >>>original
> > >> If you reply to this message it will be delivered to the
> > >> sender only. If your reply would benefit others on the list
and
> > >> your message is related to GW Micro, then please consider
sending
> > >> your message to gw-info@gwmicro.com so the entire list will
receive
> > >>
> > > it.
> > >http://www.gwmicro.com/gwinfo,
> > >> All GW-Info messages are archived at
> > >>
> > > and can be searched through and sorted using the search
> > >
> > >> form at the bottom of the page.
> > >>
> > >> If you wish to unsubscribe from this list, send a message to
> > >> listserv@gwmicro.com and include leave gw-info in the body
> > >> of the message.
> > >>
> > >>
> > >original
> > > If you reply to this message it will be delivered to the
> > > sender only. If your reply would benefit others on the list andsending
> > > your message is related to GW Micro, then please consider
> > > your message to gw-info@gwmicro.com so the entire list will
receive
>it.
> > >
> > > All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo,
>and can be searched through and sorted using the search
> > > form at the bottom of the page.
> > >
> > > If you wish to unsubscribe from this list, send a message to
> > > listserv@gwmicro.com and include leave gw-info in the body
> > > of the message.
> > >
> > >
> > >
> >
> > If you reply to this message it will be delivered to the original
> > sender only. If your reply would benefit others on the list and
> > your message is related to GW Micro, then please consider sendingreceive
> > your message to gw-info@gwmicro.com so the entire list will
>it.
> >
> > All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo,
>and can be searched through and sorted using the search
> > form at the bottom of the page.
> >
> > If you wish to unsubscribe from this list, send a message to
> > listserv@gwmicro.com and include leave gw-info in the body
> > of the message.
> >
>
>If you reply to this message it will be delivered to the original
>sender only. If your reply would benefit others on the list and
>your message is related to GW Micro, then please consider sendingit.
>your message to gw-info@gwmicro.com so the entire list will receive
>
>All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
>and can be searched through and sorted using the search
>form at the bottom of the page.
>
>If you wish to unsubscribe from this list, send a message to
>listserv@gwmicro.com and include leave gw-info in the body
>of the message.
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:mdlawler@gwmicro.com
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive
it.
and can be searched through and sorted using the search
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
