From:

 Marty Rimpau

Subject:

 Re: Question on installing WinAmp and use of tree view in window eyes

Date:

 Tue, Jul 10, 2007 4:11:52 am

Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Hi Steve, by default, all the items in the tree-view of the winamp
installer are selected for installation, but pressing the space bar on
a particular item unselects that item so it won't be installed, and
last I knew, window-eyes never read the state of those items in the
tree-view, so you never knew if they were checked, or unchecked, but to
make a long story short, but bare in mind, that I'm going from a
version that is quite old, you want to press the space bar on the
modern skin support, since it doesn't work well with our screen
readers, the winamp agent, as that will free up some resources, and
finally, though this is optional, press the space bar to unselect the
winamp visualizations, though, they don't cause any problems with our
screen readers. This is winamp 5.35, and I'm using winamp 5.13, so
several things may have changed since my version, so if anybody has any
new information, please let the list know.
--Original Message Text---
From: Steve Zielinski
Date: Mon, 9 Jul 2007 20:58:14 -0500

I'm attempting to install winamp 5.35 using WE. In the install process
there is a tree view to check those features of winamp you want. My
question is how does one know if a given item in the tree view is
correctly selected, for that matter, how does one go about selecting
these items?

Thanks,
Steve



If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.

All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.

If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.


Marty
http://www.ziff.net/404/404.htm



If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to gw-info@gwmicro.com so the entire list will receive it.

All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search
form at the bottom of the page.

If you wish to unsubscribe from this list, send a message to
listserv@gwmicro.com and include leave gw-info in the body
of the message.
--